Directions

Directions to Diamond V Mills
Plant: 436 G Avenue NW
Offices: 838 1st Street NW
Tech Center: Kirkwood College Campus
Cedar Rapids, Iowa

To the Plant and Headquarters Offices:

From I-380 Northbound - Also from Hwy 218 Northbound or Hwy 30 East or Westbound:

From Hwy 218, northbound, continue to I-380 North.

From Hwy 30 East or Westbound continue to I-380 North.

Bring I-380 North to Cedar Rapids and, take Exit 19A. This exit brings you onto a one-way street, which is 3rd Street. Stay on 3rd Street. Do not turn. You will still be heading north and running parallel with the interstate. Take 3rd Street to "I" Avenue, which is a stop sign "T" intersection where you must turn. Before you get to "I" Avenue, you will cross over First Avenue. Do not mistake First Avenue for "I" Avenue. After you cross over First Avenue you will start crossing over streets that are letters of the alphabet. Again, go to the stop sign "T" intersection of "I" Avenue.

If you are picking up a load at our plant: Turn left onto "I" Avenue. Go three blocks. Turn left onto 6th Street. Diamond V is on the left. Please pull your truck onto our scales, located between the yellow posts to your left alongside our building. Our plant personnel will weigh the truck and inform you where to load.

If you are visiting our Headquarters: Turn right onto "I" Avenue. Go one block to the stop sign and turn right on 1st Street and right again at the first drive. Our visitor parking is located along the front side of the building by the entrance.

From I-380 Southbound or Hwy 218 Southbound:

Bring I-380 South to Cedar Rapids and take Exit 20A. This exit is "F" Avenue, a one-way street. Do not turn. Follow "F" Avenue across the river. Go to 3rd Street and turn right. Go to the stop sign "T" intersection of "I" Avenue.

If you are visiting our Headquarters: Turn right onto "I". Go one block to the stop sign and turn right on 1st Street and right again at the first drive. Our visitor parking is located along the front side of the building by the entrance.

From Highway 151 - Also from Highway 13

At the large four-way stop sign intersection of Hwy 151 and Hwy 13, go south on Hwy 13. Follow Hwy 13 about six miles and you will see signs for Hwy 30. Go west on Hwy 30. Go about six more miles and you will see signs for Interstate 380. Bring I-380 North to Cedar Rapids and, take Exit 19A. This exit brings you onto a one-way street, which is 3rd Street. Stay on 3rd Street. Do not turn. You will still be heading north and running parallel with the interstate. Take 3rd Street to "I" Avenue, which is a stop sign "T" intersection where you must turn. Before you get to "I" Avenue, you will cross over First Avenue. Do not mistake First Avenue for "I" Avenue. After you cross over First Avenue you will start crossing over streets that are letters of the alphabet. Again, go to the stop sign "T" intersection of "I" Avenue.

To the Tech Center on Kirkwood College Campus:

From I-380 Northbound - Also from Highway 218 Northbound:

From Highway 218 northbound, continue to I-380 North

Bring I-380 North and take Exit 13. This is the Eastern IA Airport and Ely Exit. Turn right at the stop sign onto Wright Brothers Boulevard (you will be headed toward Ely). Go to the stop sign (approximately 1 mile). Turn left onto Kirkwood Boulevard and go to the stop sign (approximately 1 mile). Turn right onto 76th Avenue. Turn left at the Welcome To Kirkwood sign. The first listing on the sign is: Animal Health Technology and Diamond V Mills. Take the 1st left into the parking lot. The Diamond V Mills Technical Center is located in the Right side of the building.

From I-380 Southbound - Also from Highway 218 Southbound:

From Hwy 218 Southbound, continue to I-380 South

Bring I-380 South and take Exit 13. This is the Eastern IA Airport and Ely Exit. Turn left at the stop sign onto Wright Brothers Boulevard (you will be headed toward Ely). Go to the stop sign (approximately 1 mile). Turn left onto Kirkwood Boulevard and go to the stop sign (approximately 1 mile). Turn right onto 76th Avenue. Turn left at the Welcome To Kirkwood sign. The first listing on the sign is: Animal Health Technology and Diamond V Mills. Take the 1st left into the parking lot. The Diamond V Mills Technical Center is located in the Right side of the building.

From Hwy 151 - Also from Hwy 13 or Hwy 30 East or Westbound:

If you are on Hwy 30 Eastbound, continue to I-380 South

From Hwy 151 Northbound or Hwy 30 Eastbound:

Bring Hwy 151 Northbound to Highway 30 Eastbound. Take Highway 30 to I-380 South.